Titre | SAR interferometry with the RADARSAT Constellation Mission |
Télécharger | Téléchargements |
| |
Licence | Veuillez noter que la Licence du gouvernement
ouvert - Canada remplace toutes les licences antérieures. |
Auteur | Dudley, J P ;
Samsonov, S V |
Source | Géomatique Canada, Dossier public 67, 2022, 28p., https://doi.org/10.4095/329396 Accès ouvert |
Image |  |
Année | 2022 |
Éditeur | Ressources naturelles Canada |
Document | dossier public |
Lang. | anglais |
DOI | https://doi.org/10.4095/329396 |
Media | numérique; en ligne |
Formats | pdf |
Sujets | télédétection; imagerie par satellite; méthodes radar; déformation; modèles; détection de changements; surveillance; Partenariat; Automatisation; Produit; Méthodologie; géophysique; Sciences et
technologie |
Illustrations | tableaux; graphiques; images satellitaires; croquis cartographiques; modèles altimétriques numériques; graphique à barres |
Programme | Centre canadien de télédétection Soutien aux employés et le leadership |
Diffusé | 2022 01 11 |
Résumé | (disponible en anglais seulement) The RADARSAT Constellation Mission (RCM) is Canada's latest system of C-band Synthetic Aperture Radar (SAR) Earth observation satellites. The system of three
satellites, spaced equally in a common orbit, allows for a rapid four-day repeat interval. The RCM has been designed with a selection of stripmap, spotlight, and ScanSAR beam modes which offer varied combinations of spatial resolution and coverage.
Using Differential Interferometric Synthetic Aperture Radar (DInSAR) techniques, the growing archive of SAR data gathered by RCM can be used for change detection and ground deformation monitoring for diverse applications in Canada and around the
world. In partnership with the Canadian Space Agency (CSA), the Canada Centre for Mapping and Earth Observation (CCMEO) has developed an automated system for generating standard and advanced deformation products and change detection from SAR data
acquired by RCM and RADARSAT-2 satellites using DInSAR processing methodology. Using this system, this paper investigates four key interferometric properties of the RCM system which were not available on the RADARSAT-1 or RADARSAT-2 missions: The
impact of the high temporal resolution of the four-day repeat cycle of the RCM on temporal decorrelation trends is tested and fitted against simple temporal decay models. The effect of the normalization and the precision of the radiometric
calibration on interferometric spatial coherence is investigated. The performance of the RCM ScanSAR mode for wide area interferometric analysis is tested. The performance of the novel RCM Compact-polarization (CP) mode for interferometric analysis
is also investigated. |
Sommaire | (Résumé en langage clair et simple, non publié) La mission de la Constellation RADARSAT (MCR) est le plus récent système canadien de satellites d'observation de la Terre utilisant le radar à
synthèse d'ouverture (SAR). Le système de trois satellites offre une imagerie à haute résolution temporelle avec des combinaisons variées de résolution spatiale et de couverture. Les données recueillies par RCM peuvent être utilisées pour la
détection des changements et la surveillance de la déformation du sol pour diverses applications au Canada et dans le monde. En partenariat avec l'Agence spatiale canadienne (ASC), le Centre canadien de cartographie et d'observation de la Terre
(CCCOT) a mis au point un système automatisé pour générer des produits standard et avancés de déformation du sol et de détection de changement à partir des données acquises par les satellites RCM et RADARSAT-2 à l'aide d'une méthodologie de
traitement interférométrique. À l'aide de ce système automatisé, cet article étudie les propriétés interférométriques de quatre nouvelles fonctionnalités du RCM : L'impact de la haute résolution temporelle du cycle de répétition de quatre jours du
RCM sur la qualité des données interférométriques est testé. L'effet de la normalisation et de la précision de l'étalonnage radiométrique sur les produits interférométriques est étudié. La compatibilité du mode RCM ScanSAR pour l'analyse
interférométrique étendue est testée. L'utilisation du nouveau mode de polarisation compacte RCM (CP) pour l'analyse polarimétriques et interférométrique conjointe est également étudiée. |
GEOSCAN ID | 329396 |
|
|