| Title | Topographic correction for ALOS PLASAR interferometry |
| |
| Author | Joyce, K E; Samsonov, S ; Jolly, G |
| Source | IEEE Transactions on Geoscience and Remote Sensing (Institute of Electrical and Electronics Engineers) vol. 48, no. 7, 2010 p. 3020-3027, https://doi.org/10.1109/TGRS.2010.2043739 |
| Year | 2010 |
| Publisher | Institute of Electrical and Electronics Engineers (IEEE) |
| Document | serial |
| Lang. | English |
| Media | paper; on-line; digital |
| File format | pdf |
| Area | New Zealand |
| Subjects | geophysics; deformation; remote sensing |
| Released | 2010 07 01 |
| Abstract | L-band synthetic aperture radar (SAR) interferometry is very successful for mapping ground deformation in densely vegetated regions. However, due to its larger wavelength, the capacity to detect slow
deformation over a short period of time is limited. Stacking and small baseline subset (SBAS) techniques are routinely used to produce time series of deformation and average deformation rates by reducing the contribution of topographic and
atmospheric noise. For large sets of images that are presently available from C-band European Remote Sensing Satellites (ERS-1/2) and Environmental Satellite (ENVISAT), the standard stacking and SBAS algorithms are accurate. However, the same
algorithms are often inaccurate when used for processing of interferograms from L-band Advanced Land Observing Satellite Phased Array type L-band SAR (ALOS PALSAR). This happens because only a limited number of interferograms is acquired and also
because of large spatial baselines often correlated with the time of acquisition. In this paper two techniques are suggested that can be used for removing the residual topographic component from stacking and SBAS results, thereby increasing their
accuracy. |
| GEOSCAN ID | 293794 |
|
|